Station 1 / Counter
Bring the part
A worn spring, a leaking seal, a fitting with no markings left. The people behind the counter match it from stock, and if it is not on the shelf they will tell you what will fit.
C & C Hydraulics: cylinders, pumps and hoses in Terryville since 1973.
Bring in the part or the numbers stamped on it. The counter stocks fittings, seals and hose, the shop rebuilds cylinders and builds custom ones, and an in-house test bench checks pump configurations.
116 Wolcott Rd, Terryville
Walk in with the part. Leave knowing what it is.
The bay door opens onto the GRACO stock: hose reels, lube pails and pump packages. Past it is the counter, and past that the shop. Most jobs start with someone carrying a part in.
Counter ticket
- Counter hours
- Mon to Fri 7:00 am to 4:30 pm
Sat 8:00 am to 12:00 pm - Email the part details
- sales@cchydraulics.com
- Since
- 1973
- 4.6 from 102 reviews
- Status
- Certified and bonded
- Lubrication
- Authorized GRACO distributor
“Was waited on by the owner Charles. They quickly found the seals I needed for my hydraulic cylinder and then went ahead and installed them on the piston. Very friendly quick service and a very good price. I was very pleased”
The teardown bench
Six stations between the counter and your machine
Counter, teardown, fittings, test bench, machine shop, and back out the bay door.
Station 2 / Teardown
Opened on the bench
Hydraulic cylinders, motors and pumps come apart here. Rods and tubes get checked, seals get replaced, and the parts go back together in the order they came out.
Station 3 / Fittings
Thread for thread
Adapters, couplings, O-rings and hose ends matched against the old part, from high pressure hydraulic hose down to a pressure washer line.
Station 4 / Test bench
Pumps on the test bench
C & C runs its own in-house test bench, where pump configurations are tested in the shop instead of guessed at on your machine.
Station 5 / Machine shop
Made when it can't be bought
A full machine shop, welding service and an in-house nut buster for seized hardware. Custom cylinders and tanks are built here to your numbers.
Station 6 / Back to work
Back on the machine
Back on the lift, the excavator, the forklift or the log splitter. Customers mention all four in their reviews.
Work orders
Cylinders, pumps, hoses, lifts, lube and the machine shop
Seven kinds of work leave this building. Each one has its own page with what fails, how the shop handles it, and what to bring to the counter.
Cylinder repair and custom cylinders
Tie-rod, welded, telescopic and multi-stage cylinders torn down, resealed and rebuilt on the bench, plus custom cylinders built to your numbers.
Cylinders details- Pumps, motors and the test benchPump and motor repair with an in-house test bench for pump configurations, and parts for makers from Borg-Warner to Vickers.Pumps
Hoses, fittings and reelsHigh pressure, low pressure and pressure washer hose, fittings, adapters and couplings, and reels for air, fuel, grease, oil and welding hose.Hoses
Lifts, jacks, compressors and exhaustTwo-post, four-post and scissor lifts for dealers and independent shops, jacks to buy or rent, compressors and shop exhaust systems.Lifts and jacks- GRACO lubrication equipmentAn authorized GRACO distributor: LD pumps, meters, hose reels, DEF packages, fluid reclaim and Matrix fluid management.Lubrication
- Hydraulic equipment repairForklifts, farm equipment, accumulators, actuators, valves, heat exchangers and compressors brought back into service.Equipment repair
- Machine shop, welding and fabricationA full machine shop, an in-house nut buster, welding service and custom tanks made in many materials and any size.Machine shop
Machine shop
No part number? The shop makes one.
Custom cylinders, welding, custom tanks in many materials and any size, and an in-house nut buster for the hardware that will not come off. Bring the old part or the dimensions.
Machine shop and fabricationPump makers on the list
Borg-Warner to White. Call and we'll check.
Thirty-four pump makers, straight off our hydraulics page. Read the plate on your pump, then call (860) 582-0308 and the counter will check if we have it.
- Borg-Warner
- Char-Lynn
- Chelsea
- Commercial
- Continental
- Cross
- Dan Foss
- Daybrook
- Delta
- Dennison
- Dowty
- Dyna Power
- Dynex
- Eaton
- Galion
- Gresen
- Hydreco
- M.T.E.
- Meyers
- Monarch
- Parker-Hannifin
- Perfection
- Permco
- Prince
- Racine
- Ross (TRW)
- Staffa
- Stone
- Sundstrand
- Tyrone
- Vickers
- Webster
- Whit Hyp IC
- White (Rollar Stator)
Counter talk
4.6 on Google, from 102 reviews.
Names as posted on Google.
“Excellent service and fair prices, just the best shop in CT!”
“Jowy is the absolute best, that guy has pulled me out a jam many times, he really knows his stuff and is always hooking us up right! Can't say enough good things about C&C.”
“Great experience. They rebuilt the piston on my two-post lift and did a solid job”
“The help I got from Joey was top notch. Would highly recommend c&c hydra for all your pump, and hoses.”
Counter questions
What people ask before they drive over.
Anything not here, ask the counter at (860) 582-0308.
Call the counter at (860) 582-0308 or email sales@cchydraulics.com with the part, the brand and any numbers stamped on it, and we'll check if we have it. You can also bring the part to 116 Wolcott Rd in Terryville.
Yes. Cylinders, motors and pumps are repaired in our own shop, including rods, tubes and seals, and we manufacture custom cylinders when the original can't be saved or never existed.
Our pump list runs from Borg-Warner, Char-Lynn and Commercial through Eaton, Parker-Hannifin, Sundstrand and Vickers to White. The full list of 34 makers is on the pumps page, and our in-house test bench is where pump configurations get tested.
Yes. Jacks are available to purchase or rent, from floor, bottle and transmission jacks to railroad, toe and telescopic jacks. Call ahead and ask what is on the shelf.
Yes. C & C Hydraulics & Lubrication is an authorized distributor of GRACO lubrication products, including LD pumps, meters, hose reels, DEF pumps and fluid management systems.
Monday to Friday 7:00 am to 4:30 pm and Saturday 8:00 am to 12:00 pm, closed Sunday. We serve Connecticut and select areas of Massachusetts, Rhode Island and New York.
Proudly serving New England since 1973
One counter in Terryville. Machines from Connecticut and beyond.
The counter serves Connecticut and select areas of Massachusetts, Rhode Island and New York. Call ahead with the part details, or drive it over to 116 Wolcott Rd.
- ConnecticutHome state, 116 Wolcott Rd
- MassachusettsSelect areas
- Rhode IslandSelect areas
- New YorkSelect areas